Friday, August 14, 2015

Masking liquid applicator

I was shoping in my local Hobby Lobby store and I found this liquid masking tape applicator.
I just had to get it :D

 The tip of the applicator is only .5 mm (the store also have .8 mm) with self cleaning needle tip.

 I had to do a little test.
The masking fluid is very runny, but it worked perfectly for the eye sockets.  I would have to test it some more later on different areas, but I do have to say, it took me 2 sec. to apply this masking fluid with out any problems.  I like it :D

Workbench - Selvaria Bles

I have this new commission piece from Volk.  Its Selvaria Bles colored plastic model.  I never worked with one like this before, so it will be interesting :D

 A quick dry fit :D

I do have to say that this kit have one of the best part fit.  Combined with pretty amazing part breakdown, I believe this is going to be a fun project :D

Workbench - Kanami from Log Horizon

New commission piece :D
A very cute girl from Log Horizon.

When I opened the box, the parts looked very good. But....    :D
My opinion changed after closer examination.  All the key holes were a lot smaller (shallower?) then the keys.  It took me some time to shave it down for them to fit.

  And the biggest problem - tiny pin holes  >_<

The seam lines are not tiny, but not as big problem as pin holes.

 Extra flesh on the hair tips O_o

And the first dry test.

Workbench - Holo 2

After finishing my little Holo, it was time to start on the second kit of the commission.
This is 1/8 scale (I think) of Holo with movable parts.  There is over 60 plus parts, not including the joint balls/connecters.

Parts after all cleaning and priming :D
I think I used up most of my sticks to hold this "little"commission

 Four faces - three sets of hands >_<

  And a quick preview before I take some final pictures :D